Ricoh Pro 8300S - If Scratches, Streaks, or Creases Appear on Side 1 of the Paper; Leading or Trailing Edge Margin too Wide

3.Paper Delivery Problems
726
 If the degree of decurling is set to "Off", reduce the value in Decurler Feed Speed Adj: Curl Adj
Off by 0.5%.
 If the degree of decurling is set to "Weak", reduce the value in Decurler Feed Speed Adj: Curl
Adj Weak by 0.5%.
 If the degree of decurling is set to "Strong", reduce the value in Decurler Feed Speed Adj: Curl
Adj Strg by 0.5%.
3. Print the image. Is the problem resolved?
Yes
Finished!
No
Keep decreasing the value by 0.5% until the problem is resolved. If the problem persists
even though the setting has reached its minimum value, consult the product specialist.
If scratches, streaks, or creases appear on side 1 of the paper
You can lessen the problem by increasing the paper feed speed of the decurl unit.
1. On the machine operation panel: Adjustment Settings for Skilled Operators > Paper Feed/Output >
Adjust Paper Curl > Check the current decurl setting (Off, Weak, or Strong) in. (SP 1-906-001 to
012: De-curler Setting Tray <number> :Paper Path Selection)
2. In Advanced Settings for the custom paper in use, adjust the paper feed speed of the decurl unit.
 If the degree of decurling is set to "Off", increase the value in Decurler Feed Speed Adj: Curl
Adj Off by 0.5%.
 If the degree of decurling is set to "Weak", increase the value in Decurler Feed Speed Adj: Curl
Adj Weak by 0.5%.
 If the degree of decurling is set to "Strong", increase the value in Decurler Feed Speed Adj:
Curl Adj Strg by 0.5%.
3. Print the image. Is the problem resolved?
Yes
Finished!
No
Keep increasing the value by 0.5% until the problem is resolved.
If the problem persists even though the value has reached its maximum value, consult the
product specialist.
Leading or Trailing Edge Margin too Wide
Cause:
The default settings for the leading and trailing edge margins (white space) of the paper in use are too
wide to prevent paper jams..