Ricoh Pro 8300S - Cleaning Finisher SR5110; Booklet Finisher SR5120; Places Where Rollers Tend to be Dirty

3.Paper Delivery Problems
761
Cleaning Finisher SR5110/ Booklet Finisher SR5120
Transporting paper (prints) with high image density, or insufficient fusing, can cause toner to adhere to
the transport rollers or guide plates. The dirt is then transferred to the subsequent sheets.
Places Where Rollers Tend to be Dirty
The red circles indicate where the rollers tend to be dirty.
 For the locations of the rollers, see Cleaning the Rollers.
Dirty Part
Roller
[E]: Lower tray roller 1
[F]: Lower tray roller 2
[I]: Upper tray roller 2
[G]: Lower exit roller
[M]: Pre-stack addition roller
[N]: Turn transport roller
[O]: Relay stack roller (upper)
[Q]: Staple entrance roller
[A]: Entrance roller 1
[B]: Entrance roller 2
[H]: Upper tray roller 1
[J]: Upper tray roller 3
[K]: Upper tray roller 4
[D]: Horizontal transport roller
[P]: Relay stack roller (lower)