Ricoh Pro 8300S - Large Paper Not Stacked Properly; One Sheet Pushing out Another; Sheet Bending

4.Troubleshooting for Peripheral Units
787
Large Paper Not Stacked Properly
Cause:
A sheet of paper may push against another causing it to curl or bend.
This is likely to occur if:
 B4 SEF, 8"x14" SEF, or larger size of paper is used
 Coated paper is used.
 Paper that causes a lot of friction is used.
 The temperature or humidity is high.
Sheet Bending
The leading edge of the delivered sheet bends upward and backward.
[A]
Paper Exit
[B]
Output Tray
One Sheet Pushing Out Another
Because of high paper friction, the delivered sheet may get stuck and push out other sheets of paper.
[A]
Paper Exit
[B]
Output Tray