Ricoh Pro 8300S - Left Steering Plate Adjustment

5.Other Information
858
The setting for SP2-920-002 (Steering Control Roller Stable Position of Steering Roller) was "+30", so
the right steering plate was adjusted to "+1".
Left Steering Plate Adjustment
1. After executing SP2-310-001 (Force Apply Lubricant Belt Cleaning), do SP2-920-002 (Steering
Control Roller Stable Position of Steering Roller) and check its setting. Based on this setting, adjust
the position of the left steering plate by referring to the table below.
SP2-920-
002
From the Current Left Steering Plate Scale
Setting
Comments
+150 to
+121
+5
Move to upper part of scale.
If you cannot adjust to +5, move
to +6.
+120 to +96
+4
+95 to +71
+3
+70 to +46
+2
+45 to +21
+1
-20 to 0 to
+20
-21 to -45
-1
Move to lower part of scale.
If you cannot adjust to -5, move
to -6.
-46 to -70
-2
-71 to -95
-3
-96 to -120
-4
-121 to -150
-5