Ricoh Pro 8310 - Page 699

2.Image Quality Problems
691
This may occur when:
 Using thick paper with rough edges (caused when cutting)
 Printing images with large coverage areas such as solid fill
 Printing on glossy paper
Solution:
Prepare a fusing unit for each frequently-used paper size, and change (swap) the fusing unit according
to the paper size. Up to four units can be used.
 To check if the fusing unit is changed, the registration number for that unit must be selected
and the page counter must be reset.
 This settings are done using the Adjustment Settings for Skilled Operators.
 [Fuser Unit No.] Select a number in the range 1 to 4 to assign a number to the machine.
 [Current Value: Distance Counter: Fuser Unit]
 [Current Value: Distance Counter: Fuser Cleaning Unit]
 [Current Value: Page Counter: Fuser Unit]
 [Current Value: Page Counter: Fuser Cleaning Unit]