Ricoh Pro 8320 - Paper Deflection; Sheets Are Curled Upward; There Is Airflow in the Room

4.Troubleshooting for Peripheral Units
788
Paper Deflection
Because of high paper friction, the delivered sheet may arch up and become crimped.
[A]
Paper Exit
[B]
Output Tray
Solution:
Depending on the cause of the problem, do one of the following:
Sheet Bending
There is airflow in the room.
Minimize the airflow. For instance, turn the air conditioner off.
Sheets are curled upward.
 If the decurl unit is used
1. On the Adjustment Settings for Skilled Operators menu, select Machine: Paper Feed/ Output >
Adjust Paper Curl > Set to "Adjust Concave Curl". (SP 1-906-001 to 012: De-curler Setting Tray
<number> :Paper Path Selection)
2. To control the amount of curl correction, select "Weak" if the present setting is "Off" or "Strong".
 If the decurl unit is not used
Remove the paper stack and turn it upside down.
Limp paper should be delivered to the proof tray [A] if it is used.