5.Other Information
849
Paper curl, jams, wrinkling may occur.
Blurred images, lines, blistering may occur with glossy paper.
Reducing Low Power Mode Recovery Time
The new heat pipe mechanism inside the heating roller is designed to stabilize the temperature of the
heating roller, but it can also cause an increase in the length of time for the machine to recover from low
power mode. In the Trained Operator Mode, use item 0207 on the menu to adjust the fusing ready
temperature in order to shorten recovery time. This adjustment can also be done with SP1-107-005
Target Temperature Setting - Low Power: Center.
To Next Page
Loading...
