Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray 1] 0.0 3.0 -3.0 0.1 mm
[Tray 2]
[Tray 3]
[Tray 4]
[Bypass Tray]
[2 Sided]
[LCT]
[Paper Weight 1]
[Paper Weight 2]
[Paper Weight 3]
[Paper Weight 4]
[Paper Weight 5]
[Paper Weight 6]
[Paper Weight 7]
[Paper Weight 8]
• If sheets are delivered face down, turn them over horizontally and check the image position.
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Adj Image Position of Side1 Across Feed], [Adj Image Position of
Side2 Across Feed] in [Advanced Settings] takes precedence.
0107: [Adjust Erase Margin With Feed Direction]
Adjust the mask width at the leading edge, trailing edge, left edge, or right edge of the image.
By increasing the mask width, you can increase the paper margin at the leading edge, trailing edge, left
edge, or right edge of the paper.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
26
To Next Page
Loading...
