• Adjusting this setting may cause distorted text and blurred lines. Check the printed images while
making the adjustment.
0205: [Adjust Density Difference Across Feed Direction]
Adjust the image density difference between the top and bottom of the image.
To make the adjusted settings take effect, turn the main power off and then back on.
Press [+] to increase the density at the bottom (and decrease it at the top) and press [−] to decrease the
density at the bottom (and increase it at the top).
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Black] 0 5 -5 1 None
[Cyan]
[Magenta]
[Yellow]
• Depending on the machine's other settings, this setting may have no effect.
0207: [Adjust Fusing Temperature on Standby]
Adjust the set fusing temperature according to the machine status.
To achieve proper fusing when printing, the machine adjusts the temperature of the heating roller
according to the paper type or thickness. You can reduce the wait time during which the machine makes
this adjustment by changing the temperature in effect during standby.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
30
To Next Page
Loading...
