*
You can adjust the value in steps of 1 percentage using from Web Image Monitor.
47: [Paper Transfer Current; Lead Edge: FC]
Adjust the paper transfer current at the leading edge of the paper when printing in full color.
Specify the paper transfer currents as a percentage of the currents specified in 43: [Paper Transfer
Current: FC: Side 1] and 45: [Paper Transfer Current: FC: Side 2].
Use this to reduce image quality degradation at the leading edge of the paper.
Press [+] to increase the percentage and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Current; Lead Edge: Full
Color]
300 5 5 %
*
You can adjust the value in steps of 1 percentage using from Web Image Monitor.
48: [Ppr Transfer Current Lead Edg Dist: BW]
Adjust the area at the leading edge of the paper for application of paper transfer current.
Specify the length of area at the leading edge of the paper to which the current set in 46: [Paper
Transfer Current; Lead Edge: B&W] is applied.
Use this to reduce image quality degradation at the leading edge of the paper.
Press [+] to increase the length of area at the leading edge to apply the current and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Current; Lead Edge Dist:
B&W]
30 0 1 mm
49: [Ppr Transfer Current Lead Edg Dist: FC]
Adjust the area at the leading edge of the paper for application of paper transfer current.
Specify the length of area at the leading edge of the paper to which the current set in 47: [Paper
Transfer Current; Lead Edge: FC] is applied.
Use this to reduce image quality degradation at the leading edge of the paper.
Press [+] to increase the length of area at the leading edge to apply the current and [−] to reduce it.
Setting Values
97
To Next Page
Loading...
