Ricoh Pro C5110S - Page 182

007
Latest:L:RE *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (L side/RED/EVEN Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
008
Latest:L:RO *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (L side/RED/ODD Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
009
Latest:L:GE *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (L side/GREEN/EVEN Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
010
Latest:L:GO *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (L side/GREEN/ODD Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
2. Main SP Tables-4
180