Ricoh Pro C5110S - Page 183

011
Latest:L:BE *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (L side/BLUE/EVEN Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
012
Latest:L:BO *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (L side/BLUE/ODD Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
4852 [LED White Level Peak Read]
001
Factory Setting:F:RE *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (F side/RED/EVEN) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
002
Factory Setting:F:RO *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (F side/RED/ODD) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
003
Factory Setting:F:GE *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (F side/GREEN/EVEN) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
SP4-XXX (Scanner)
181