Ricoh Pro C5110S - Page 184

004
Factory Setting:F:GO *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (F side/GREEN/ODD) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
005
Factory Setting:F:BE *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (F side/BLUE/EVEN) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
006
Factory Setting:F:BO *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (F side/BLUE/ODD) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
007
Factory Setting:L:RE *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (L side/RED/EVEN) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
008
Factory Setting:L:RO *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (L side/RED/ODD) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
009
Factory Setting:L:GE *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves White level peak scanning value (L side/GREEN/EVEN) for factory light
quantity adjustment of LED.
Factory scanning value for white level peak from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
2. Main SP Tables-4
182