004
Set Std Chart ENG [0 or 1 / 0 / 1/step]
Re-write scan settings (front side current value) of normal chart.
005
Chromaticity Rank *ENG [0 to 255 / 0 / 1/step]
Correct dispersion of scanner reading value among same models, based on the Color
degree rank setting value of Scanner (front side).
(Setting value0: Correction OFF)
4958 [Read/Restore Std: Rear]
001
Read New Chart ENG [0 or 1 / 0 / 1/step]
Sets scan settings (Reverse side current value) of normal chart by run scanning.
002
Recall Prev Chart ENG [0 or 1 / 0 / 1/step]
Unset scan settings (Reverse side current value) of normal chart.
004
Set Std Chart ENG [0 or 1 / 0 / 1/step]
Re-write scan settings (Reverse side current value) of normal chart.
005
Chromaticity Rank *ENG [0 to 255 / 0 / 1/step]
Correct scattered scanning value among same models based on Color degree rank setting
value of Scanner (Reverse side).
(Setting value0: Correction OFF)
4993 [High Light Correction]
001
Sensitivity Selection *ENG
[0 to 9 / 4 / 1/step]
0: Weak
9: Strong
Sets detect sensitivity for full color auto density. Larger the value, weaker (less background
tracking) the sensitivity.
002
Range Selection *ENG
[0 to 9 / 4 / 1/step]
0: Weak
9: Strong
Sets detect area for full color auto density. Larger the value, wider the area.
2. Main SP Tables-4
186
To Next Page
Loading...
