Ricoh Pro C5110S - Page 24

003
Current: M *ENG [0.00 to 5.00 / 2.70 / 0.01V/step]
Current TD Sensor Output Voltage Target Value: Displays/Sets Vtref (M).
004
Current: Y *ENG [0.00 to 5.00 / 2.70 / 0.01V/step]
Current TD Sensor Output Voltage Target Value: Displays/Sets Vtref (Y).
3232 [Vtref Correct:Pixel]
001
ON/OFF *ENG [0 to 1 / 1 / 1/step]
Sets ON/OFF for Pixel Vtref Correct Correction.
3233 [PPAT Vtref Corr :Disp/Set]
041
Vtavg Rate(H) *ENG [0 to 100 / 50 / 1%/step]
Sets the weight of Vtavg and Vtref used for Vtref Correction Standard Value when Paper
Interval Adhesion Amount exceeds Adhesion Amount Threshold (Upper Limit).
051
Vtavg Rate(M) *ENG [0 to 100 / 50 / 1%/step]
Sets the weight of Vtavg and Vtref used for Vtref Correction Standard Value when Paper
Interval Adhesion Amount exceeds Adhesion Amount Threshold (Lower Limit).
061
Vtavg Rate(L) *ENG [0 to 100 / 50 / 1%/step]
Sets the weight of Vtavg and Vtref used for Vtref Correction Standard Value when Paper
Interval Adhesion Amount exceeds Adhesion Amount Threshold (Lower Limit).
3250
[ImgArea :Disp]
Displays image area of latest page.
001 Latest:K *ENG
[0 to 9999 / 0 / 1cm2/step]
002 Latest:C *ENG
003 Latest:M *ENG
004 Latest:Y *ENG
3251 [DotCoverage :Disp]
1. Main SP Tables-3
22