Ricoh Pro C5110S - Page 460

6929
[SoftRollerPress QuantityTuning] *D137/D138 only
Fine-tunes Decurler Roller Pressure ranging from +0.5 - -0.3mm with Custom Paper.
•
Increases or decreases the specified value to the pressure in Decurler Pressure level
(Level 1-5).
• Plus value: Curl UP Correction
• Minus value: Curl Down Correction
001 Custom Paper001 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
002 Custom Paper002 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
003 Custom Paper003 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
004 Custom Paper004 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
005 Custom Paper005 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
006 Custom Paper006 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
007 Custom Paper007 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
008 Custom Paper008 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
009 Custom Paper009 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
010 Custom Paper010 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
011 Custom Paper011 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
012 Custom Paper012 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
013 Custom Paper013 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
014 Custom Paper014 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
015 Custom Paper015 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
016 Custom Paper016 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
017 Custom Paper017 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
018 Custom Paper018 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
019 Custom Paper019 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
020 Custom Paper020 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
021 Custom Paper021 ENG [-0.3 to 0.5 / 0.0 / 0.1mm/step]
4. Main SP Tables-6
458