002 Change Time : Last1 *CTL [- / - / -]
101 Initialize Time : Latest *CTL [- / - / -]
102 Initialize Time : Last1 *CTL [- / - / -]
7852 [DF Glass Dust Check]
001
Dust Detection Counter *ENG [0 to 65535 / 0 / 1/step]
Records the time of detecting dust on all points of surface scanning position.
Decides as same dust and won’t count it when detected even before the next job.
*Counts when SP4-020-001: DF Scanning glass dust detect setting chart is ON.
002
Dust Detection Clear Counter *ENG [0 to 65535 / 0 / 1/step]
For checking effect for surface scan position move.
Counts the times for stripes avoided by detecting dust and moving scan position of sheet
through DF.
*Counts when SP4-020-001: DF Scanning glass dust detect setting chart is ON.
003
Dust Detection Counter: Back *ENG [0 to 65535 / 0 / 1/step]
Counts the times for detecting dust at all points of rear face scanning position.
Decides as same dust and won’t count it when detected even before the next job.
*Counts when SP4-020-001: DF Scanning glass dust detect setting chart is ON.
7855 [Coverage Range]
001 Coverage Range 1 *CTL [0 to 200 / 5 / 1time/step]
002 Coverage Range 2 *CTL [0 to 200 / 20 / 1time/step]
7901
[Assert Info.]
Records the location where a problem is detected in the program. The data stored in this SP
is used for problem analysis.
001 File Name *CTL [- / - / -]
002 Number of Lines *CTL [- / - / -]
003 Location *CTL [- / - / -]
5. Main SP Tables-7
534
To Next Page
Loading...
