bit 5 Display UTF-8 text in the operation panel Enabled Disabled
Enabled (=0):
Text composed of UTF-8 characters can be displayed in the operation panel.
Disabled (=1):
UTF-8 characters cannot be displayed in the operation panel.
For example, job names are sometimes stored in the MIB using UTF-8 encoded
characters. When these are displayed on the operation panel, they will be garbled
unless this switch is enabled (=0).
bit 6 Disable super option Enabled Disabled
Switches super option disable on / off.
If this is On, multiple jobs are grouped at LPR port. PJL settings are enabled even jobs
that are specified queue names are sent.
bit 7 Enable/Disable Print from USB/SD's Preview
function
Enabled Disabled
Determines whether Print from USB/SD will have the Preview function.
Enabled (=0): Print from USB/SD will have the Preview function.
Disabled (=1): Print from USB/SD will not have the Preview function.
1001 [Bit Switch]
010 Bit Switch A Settings 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 DFU - -
bit 4 DFU - -
bit 5 Store and Skip Errored Job locks the queue Queue is not
locked after
SSEJ
Queue locked
after SSEJ
If this is 1, then after a job is stored using Store and Skip Errored Job (SSEJ), new
jobs cannot be added to the queue until the stored job has been completely printed.
8. Printer SP Mode
812
To Next Page
Loading...
