bit 6 Allow use of Store and Skip Errored Job if
connected to an external charge device.
Does not
allow SSEJ
with ECD
Allows SSEJ
with ECD
If this is 0, Store and Skip Errored Job (SSEJ) will be automatically disabled if an
external charge device is connected.
Note: We do not officially support enabling this bitsw (1). Use it at your own risk.
bit 7 Job cancels remaining pages when the paid-for
pages have been printed on an external charge
device
Job does not
cancel
Job cancels
When setting 1 is enabled, after printing the paid-for pages on an external charge
device, the job that includes any remaining pages will be canceled.
This setting will prevent the next user from printing the unnecessary pages from the
previous user's print job.
1001 [Bit Switch]
011 Bit Switch B Settings 0 1
bit 0 Show Menu List Hide Menu
List
Show Menu
List
If this is 0, the Menu List button will be removed from Printer Features.
bit 1 Print job interruption Does not
allow
interruption
Allow
interruption
0 (default): Print jobs are not interrupted. If a job is promoted to the top of the print
queue, it will wait for the currently printing job to finish.
1: If a job is promoted to the top of the queue, it will interrupt the currently printing
job and start printing immediately.
bit 2 DFU - -
bit 3 DFU - -
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
SP1-XXX
813
To Next Page
Loading...
