001
0:Link with Doc. Srv
1:Enable
*CTL
[0 or 1 / 0 / 1 /step]
0: Linked, 1: On
Enables and disables the document server. When you select "0," the document server is
enabled or disabled in accordance with Copy Service Mode SP5-967. When you select
"1," the document server is enabled regardless of Copy Service Mode SP5-967.
1101
[Data Recall]
Recalls a set of gamma settings. This can be either a) the factory setting, b) the previous
setting, or c) the current setting.
001 Factory *CTL
[ - / - / - ]
[Execute]
002 Previous *CTL
003 Current *CTL
004 ACC *CTL
1102
[Resolution Setting]
Selects the printing mode (resolution) for the printer gamma adjustment.
001
Tone Control Mode
Selection
CTL
[0 to 9 / 0 / 1/step]
0: 1200x1200 Photo (2bit/4col)
1: 1200x1200 Photo (1bit/4col)
2: 600x600 Photo (4bit/4col)
3: 600x600 Photo (2bit/4col)
4: 600x600 Photo (1bit/4col)
5: 1200x1200 Text (2bit/4col)
6: 1200x1200 Text (1bit/4col)
7: 600x600 Text (4bit/4col)
8: 600x600 Text (2bit/4col)
9: 600x600 Text (1bit/4col)
1103
[Test Page]
Prints the test page to check the color balance before and after the gamma adjustment.
SP1-XXX
815
To Next Page
Loading...
