80 cpm (full speed)
• [Reduce Level 1]
64 cpm (80% of full speed)
• [Reduce Level 2]
52 cpm (65% of full speed)
• [Reduce Level 3]
40 cpm (50% of full speed)
• The setting will take effect if the ambient temperature is higher than 17°C (62.6°F).
Setting Items Values
[Reduce Initial CPM: Normal/High Temp.
Environment]
[Do not Reduce]
[Reduce Level 1]
[Reduce Level 2]
[Reduce Level 3]
83: [Adjust Cleaning Web Motor Interval]
Specify the interval between each activation of the cleaning web.
If you set this to "-50%", the interval is reduced in half. Reducing the interval causes the cleaning web to
wear out twice as fast, which makes it necessary to replace the cleaning web more often.
Press [+] to increase the interval and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Adjust Cleaning Web Motor Interval] 0 -75 5 %
84: [Cleaning Web Contact and Disengage]
Specify the cleaning web separation behavior during printing.
If set to [On], the cleaning web separates during printing. If paper jams or the fusing pressure roller
rotates in reverse, the cleaning web automatically separates regardless of this setting.
This must be adjusted if image quality degradation due to fusing (black spots) occurs when printing on
glossy or matte paper.
4. Details of Menu Items in Advanced Settings
110
To Next Page
Loading...
