94: [Letter Fold-in Posn 2: Single-sheet Fold]
Adjust the overall fold size (L) of letter fold-in sheets when using the multi-folding unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (L) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
Setting Items Max. Value Min. Value Step Unit
[Adjust Letter Fold-in Position 2: Single-
sheet Fold]
4.0 -4.0 0.2 mm
95: [Double Parallel Fold Position 1]
Adjust the fold position of the bottom segment 1 (S1) of double parallel-folded sheets when using the
multi-folding unit.
Press [+] to increase (S1) and [−] to reduce it.
The upper right illustration shows a partly opened, double parallel-folded sheet (folded in half), and the
lower right illustration shows a fully folded sheet.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
4. Details of Menu Items in Advanced Settings
116
To Next Page
Loading...
