Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray: Paper Weight 4] 110 999 0 1 m
[Tray: Paper Weight 5] 130 999 0 1 m
[Tray: Paper Weight 6] 150 999 0 1 m
[Tray: Paper Weight 7] 170 999 0 1 m
[Tray: Paper Weight 8] 190 999 0 1 m
[Bypass Tray: Paper Weight 2] 70 999 0 1 m
[Bypass Tray: Paper Weight 3] 90 999 0 1 m
[Bypass Tray: Paper Weight 4] 110 999 0 1 m
[Bypass Tray: Paper Weight 5] 130 999 0 1 m
[Bypass Tray: Paper Weight 6] 150 999 0 1 m
[Bypass Tray: Paper Weight 7] 170 999 0 1 m
[Bypass Tray: Paper Weight 8] 190 999 0 1 m
0140: [Buffer Pass Unit Fan Activation Setting]
Select when the buffer pass unit fan is to operate.
The occurrence of blocking (toner particles on stacked printed copies sticking together and detaching
because of heat and pressure) depends on the type of paper and the temperature. You can activate the
fan, for example, when using a type of paper likely to cause blocking, such as coated paper, or stop the
fan to reduce the machine's operating noise when using the machine under conditions unlikely to cause
blocking.
Setting Items Values Default Value
[Buffer Pass Unit Fan Activation Setting] [All Paper Weights]
[Weight 3 & Above]
[Weight 4 & Above]
[Weight 5 & Above]
[Weight 6 & Above]
[Off]
[Weight 4 & Above]
2. Details of Menu Items in Adjustment Settings for Skilled Operators
34
To Next Page
Loading...
