6. Change the settings for custom paper (such as paper's name, size, and type), as
necessary.
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color], [Prepunched
or Not], or [Textured or Not] and press [OK], a message appears to notify you that the [Advanced
Settings] will be initialized. To apply the changes for those settings, select [Change]. To cancel the
changes, select [Do not Change].
7. Press [OK].
8. Press [Exit].
9. Close the [Tray Paper Settings] screen.
• When using the standard operation panel
1. Press the [Paper Setting] key.
• When using the Smart Operation Panel
1. Press [User Tools] ( ) on the top right of the screen.
• When you register and scan custom paper using the Media Identification Unit, following items are
automatically specified:
• Paper weight
• Coated paper other than matte paper
• For details about custom paper settings, see "Custom Paper Settings", Paper Settings.
• For details about [Advanced Settings], contact your machine administrator.
Modifying the registered custom paper settings using the Media Identification Unit
1. Display the [Tray Paper Settings] screen.
• When using the standard operation panel
1. Press the [Paper Setting] key.
Registering a Custom Paper with the Media Identification Unit
213
To Next Page
Loading...
