A multi-sheet fold copy is counted as a single sheet.
This setting becomes effective only if [Folding Unit Tray Full Detection] is set to [On].
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[No. of Sheets Folded after Full
Detection]
0 250 0 1 sheet(s)
• If the display of the warning message is delayed, the paper delivered to the folding unit tray may
not be stacked properly or the delivered paper may block the paper exit and cause subsequent
paper to be misfed.
0608: [Z-fold Position 1]
Adjust the width of the bottom end segment (S) of Z-folded sheets when using the multi-folding unit.
Press [ ] to increase (S) and [ ] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
CEZ001
L
S
Paper feed direction
Setting Values
87
To Next Page
Loading...
