Ricoh Pro C5300S - Procedure for Sending Files to the Shared Folder Registered in the Address Book

You can specify multiple destinations.
See "Specifying the Destination or Recipient", User Guide.
7. Press [Sender Name], select the e-mail sender, and then press [OK].
See "Specifying the E-mail Sender", User Guide.
8. To use Message Disposition Notification, press [Recept. Notice].
If you press [Recept. Notice], the selected e-mail sender will receive e-mail notification when the e-
mail recipient has opened the e-mail.
9. Press [Start].
• This machine supports SMTPS (SMTP over SSL).
• This machine supports Web mail sending.
• If the settings are set as follows, you can send e-mails without entering anything for [Sender
Name].
• See "Send (Email/Folder)", User Guide.
• Depending on the security setting, the logged-in user may be specified as [Sender Name].
• To use Message Disposition Notification, log in to the machine as a user and specify the sender.
Note, however, that the [Recept. Notice] notification e-mail may not be transmitted if the e-mail
software of the recipient does not support Message Disposition Notification.
Basic Procedure for Sending Scan Files by E-mail
161