Changing Tray Paper Settings
If the specified size differs from the actual size of the paper loaded in the paper tray, a misfeed might
occur because the correct paper size is not detected.
• If the specified paper type differs from the actual type of paper that is loaded in the paper tray, the
paper might misfeed, the toner might not fuse properly, or the print quality might be reduced.
Specifying a Custom Paper
1. Press [Tray Paper Settings] on the Home screen.
2. Select the number of the tray whose paper settings you want to specify.
3. Select the custom paper that you want to use, and then press [OK].
The custom papers that can be used in the selected tray appear.
Press [ Previous] or [ Next] to scroll through the list to find a paper that you want to select.
After selecting a custom paper, you can check its type and color by pressing Check Settings.
4. Press [Cover/Designation/Slip/Separation Sheet] tab.
5. Change the settings for the copy function (such as front cover sheet and designation
sheet), if necessary.
6. Press [Home] ( ) to close the [Tray Paper Settings] screen.
• If you want to change the custom paper settings, press [Change Custom Paper Sett.] in Step 3.
9. Paper Settings
316
To Next Page
Loading...
