6. Close the ADF.
7. Press [Start Scanning].
8. Press [Home] ( ) after performing the adjustment.
• When the screen is displayed, select [Quick Test Pattern] to apply compensation in a batch, but
select a different resolution and apply compensation again if you feel the adjusted color is not
appropriate.
• If you feel the color before the adjustment is more appropriate than the adjusted color, press
[Revert to Previous] in Step 3. The resolution selection screen is displayed when you press [Revert to
Previous] under "Printer Function". On the screen, select the same resolution as the one specified
when you performed calibration.
• When "The printing speed is now being limited because the internal cooling fan is active", the
message [Auto Color Calibration] cannot be executed. Wait until the message disappears, and
then execute the function.
When Printed Colors Appear Differently
471
To Next Page
Loading...
