Original Placing originals
Original
Orientation
Orientation Copy
Top to Top
Top to Bottom
1. Press [Dup./ Combine/ Series].
2. Make sure that [Duplex] is selected. If [Duplex] is not selected, press [Duplex].
3. Select [1 Sided 2 Sided] or [2 Sided 2 Sided] according to how you want the
document to be output.
To change the original or copy orientation, press [Orientation].
For details about the setting, see page 149 "Specifying the Original and Copy Orientation".
4. Press [Original Orientation].
5. Select the original orientation, and then press [OK].
6. Press [OK].
5. Copy
148
To Next Page
Loading...
