Printing Stored Documents
Prints stored documents on the Document Server.
The items you can specify on the printing screen are as follows:
• Paper tray
• The number of prints
• [Output/ Finisher] ([Output], [Finisher], [Folding Unit], [Perfect Binding], [Stacker])
• [Stamp] ([Preset Stamp], [User Stamp], [Date Stamp], [Page Numbering], [Stamp Text])
• [Cover/ Slip Sheet] ([Front Cover], [Back Cover], [Designate / Chapter], [Slip Sheet])
• [Edit] ([Margin Adj.], [Edit Image])
• [2 Sided / Book] ([1 Sided Print], [2 Sided Top to Top], [2 Sided Top to Bottom], [Specify Duplex
Pages], [Booklet], [Magazine])
For details about each function, see the each section.
1. Select a folder.
2. Select a document to be printed.
3. When printing two or more documents at a time, repeat Step 2.
Up to 30 documents can be printed.
4. When specifying printing conditions, press [To Printing Screen], and then configure print
settings.
5. Enter the number of print copies with the number keys.
The maximum quantity that can be entered is 9999.
6. Press the [Start] key.
• If a password is specified for the document, enter it, and then press [OK].
• To cancel the selection, press the selected (highlighted) key.
• Pressing [Reset] cancels every selection.
10. Document Server
406
To Next Page
Loading...
