1. Select a number that is labeled as "Not Programmed".
• The custom paper overwrites the existing item if you select an existing custom paper.
1. Press [Save].
2. Press [Program].
3. Press [Exit].
4. Press .
5. Press the [Home] ( ) icon at the center bottom of the screen.
• When you register and scan custom paper using the Media Identification Unit, following items
are automatically specified:
• Paper weight
• Coated paper other than matte paper
• For details about custom paper settings, see page 57 "Custom Paper Settings".
• For details about [Advanced Settings], contact your machine administrator.
Modifying the registered custom paper settings using the Media Identification Unit
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [Paper Tray] tab.
3. Press [CustomPaper Management].
4. Select the custom paper whose settings you want to modify.
If the paper you want to select is not displayed, use [Jump to Row], or scroll through the
screen until the desired item is displayed.
5. Press .
6. Press [Scan the Value].
7. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
3. Useful Functions
54
To Next Page
Loading...
