Solution:
Turn the power off and then back on. Then check if the problem is resolved.
If the problem persists, contact the service representative.
Paper is Stained (Clean rollers and paper guides)
If paper with high image density is fed or the fusing is insufficient, the paper feed roller (driven roller)
and paper guides may become stained with toner, causing stains on paper.
Clean the paper feed roller (driven roller) and paper guides.
"173 Finisher: Shift Tray Paper Path 1", Regular Maintenance Guide
"175 Finisher: Staple Paper Path 1", Regular Maintenance Guide
11. Post-Processing Option Troubleshooting
304
To Next Page
Loading...
