Corrections Regarding the Registration of Custom Paper
The following corrections have been applied to the descriptions regarding the registration of custom paper as shown below.
(1) The procedure to specify the paper name from the Master Library
Paper Settings
Registering a Custom Paper > Registering a Custom Paper > Selecting the Paper’s Name from the Master Paper
Operator’s Guide
3. Paper Settings > Registering a Custom Paper > Registering a Custom Paper > Selecting the Paper’s Name from the Master Paper
Basic Operation/Printing Guide
3. Printing on Special and Thick Paper with Optimal Settings > Registering Custom Paper Based on the Data Registered in Master Paper
Correction
1 Press the [Media] hub [Master Paper].
M0EDPM7220
2 Select the check box of the paper name of the paper to be registered, and then press [Add].
M0EDPM7221
Register paper one at a time. Even if you select the check box of two or more paper, you cannot register all the selected paper together at once.
3 Specify the "Paper Size" to register.
[Select from List]: Select the size of the paper to be registered in "Size".
[Create New Custom Size]: You can specify a size that is not on the list.
M0EDPM7222
4 Press [OK].
5 Press [OK].
The paper is registered as a "Custom Paper".
(2) The procedure to register paper whose paper name is not displayed in the Master Library
Paper Settings
Registering a Custom Paper > Registering a Custom Paper > Registering a Paper Whose Paper Name Is Not Displayed in the Master Paper
Operator’s Guide
3. Paper Settings > Registering a Custom Paper > Registering a Custom Paper > Registering a Paper Whose Paper Name Is Not Displayed in the Master Paper
Correction
Manually specifying a paper's type and weight
You can specify any paper type, weight, and other attributes of the paper to be registered.
Specify an appropriate setting that matches the paper to be used in each setting item. If you specify a setting that does not match the paper that you
use, a paper jam may occur.
1 Press the [Media] hub [Add].
M0EDPM7223
2 Specify "Size", and then press [OK].
3 Enter the paper name in "Custom Paper Name", and configure the paper information.
M0EDPM7224
Specify [Glossy] or [Matte] in "Coated Paper" when you are using Coated Paper (Glossy) or Coated Paper (Matte) including Silk, Dull, Satin
Coated, and other types of paper. Also, check that the correct paper is specified in "Paper Type".
4 Press [OK].
The paper is registered as a "Custom Paper".
(3) Other Corrections
Registration (Front and Back Sides) Adjustment Procedure Manual
4 Step 1: Programming Custom Paper
Correction
If the paper you want to use is registered as a Custom Paper, you do not need to perform the procedure described on this page.
For details about registering a Custom Paper, see the description in (1) and (2) shown above, or in "Registering a New Custom Paper
by Modifying an Existing Paper", User Guide.
OSS DVD
Additional information
To obtain the additional information that is not included on the provided OSS DVD, access the following website:
http://www.support-download.com/bb/html/dr_ut_e/oss/
© 2023
EN GB EN US EN AU M0EB-Z082
To Previous Page
Loading...
