Setting Item Max. Value Min. Value Step Unit
01: Leading Edge/03: Trailing Edge/04:
Trailing Edge: AC
10 -10 1 None
02: Leading Edge Length 30 0 mm
05: Trailing Edge Length 100
FC/FCS
Under the following conditions, set the standard value of the leading/trailing edge correction of paper
transfer output.
Full Color Printing/Full Color Printing including Special Color
Setting Item Max. Value Min. Value Step Unit
06: Leading Edge/08: Trailing Edge/09:
Trailing Edge: AC
10 -10 1 None
07: Leading Edge Length 30 0 mm
10: Trailing Edge Length 100
S
Under the following conditions, set the standard value of the leading/trailing edge correction of paper
transfer output.
Printing using Special Color Only
12: Machine: Image Quality
169
To Next Page
Loading...
