Ricoh Pro C7500 - Page 177

FCS
Under the following conditions, adjust heat roller temperature, temperature correction, and initial sheet
interval.
Full Color Printing including Special
High Quality is applied in DFE Setting
Setting Item Max. Value Min. Value Step Unit
06: Heat Roller Temp: Clear/Special/07:
Heat Roller Temp: White/08: Heat Roller
Temp: Metallic/09: Heat Roller Temp:
Option
200 100 1 Degree C
10: Corct Temp: Init Fd: Clear/
Special/11: Corct Temp: Init Fd:
White/12: Correct Temp: Initial Feed:
Option/13: Correct Temp: Initial Feed:
Option/14: Corct Temp: Pre-Fd: Clear/
Special/15: Corct Temp: Pre-Fd:
White/16: Correct Temp: Pre-Feed:
Metallic/17: Correct Temp: Pre-Feed:
Option
30 0
18: Init Sht Intvl: Low: Clear/Special/19:
Init Sht Intvl: Low: White/20: Initial Sheet
Interval: Low: Metallic/21: Initial Sheet
Interval: Low: Option/22: Init Sht Intvl:
Clear/Special/23: Init Sht Intvl:
White/24: Initial Sheet Interval:
Metallic/25: Initial Sheet Interval: Option
3 None
S
Under the following conditions, adjust heat roller temperature, temperature correction, and initial sheet
interval.
Printing using Special Color Only
High Quality is applied in DFE Setting
12: Machine: Image Quality
175