Ricoh Pro C7500 - Page 179

FCS: Fuser Setting HQ
Under the following conditions, adjust heat roller temperature, temperature correction, and initial sheet
interval.
Full Color Printing including Special
High Quality is applied in DFE Setting
Setting Item Max. Value Min. Value Step Unit
51: Heat Roller Temp: Clear/Special/52:
Heat Roller Temp: White/53: Heat Roller
Temp: Metallic/54: Heat Roller Temp:
Option
200 100 1 Degree C
55: Corct Temp: Init Fd: Clear/
Special/56: Corct Temp: Init Fd:
White/57: Correct Temp: Initial Feed:
Metallic/58: Correct Temp: Initial Feed:
Option/59: Corct Temp: Pre-Fd: Clear/
Special/60: Corct Temp: Pre-Fd:
White/65: Initial Sheet Interval: Low:
Metallic/66: Initial Sheet Interval: Low:
Option
30 0
61: Correct Temp: Pre-Feed: Metallic/62:
Correct Temp: Pre-Feed: Option/63: Init
Sht Intvl: Low: Clear/Special/64: Init Sht
Intvl: Low: White/67: Init Sht Intvl: Clear/
Special/68: Init Sht Intvl: White/69: Initial
Sheet Interval: Metallic/70: Initial Sheet
Interval: Option
3 None
S: Fuser Setting HQ
Under the following conditions, adjust heat roller temperature, temperature correction, and initial sheet
interval.
Printing using Special Color Only
High Quality is applied in DFE Setting
12: Machine: Image Quality
177