Ricoh Pro C7500 - Page 182

The lager value becomes, the earlier print starts. However, fusing quality may become lower.
Setting Item Max. Value Min. Value Step Unit
01: Level: BW/FC/FCS 16 1 1 None
FCS
Under conditions below, set range of fusing start temperature.
FC with S
HQ is applied in DFE Setting
The lager value becomes, the earlier printing starts. However, fusing quality may become lower.
Setting Item Max. Value Min. Value Step Unit
02: Level: Clear/Special/03: Level:
White/04: Level: Metallic/05: Level:
Option
16 1 1 None
S
Under conditions below, set range of fusing start temperature. Print using S
Only HQ is applied in DFE
The lager value becomes, the earlier print starts. However, fusing quality may become lower.
Setting Item Max. Value Min. Value Step Unit
06: Level: Clear/Special/07: Level:
White/08: Level: Metallic/09: Level:
Option
16 1 1 None
BW/FC/FCS: Fuser Setting HQ
Under conditions below, set range of fusing start temperature.
B&W/FC/FC with S
HQ is not applied in DFE
The lager value becomes, the earlier print starts. However, fusing quality may become lower.
4. Adjustment Setting Items for a Custom Paper
180