Setting Item Description
160: Right Drawer: CIS
162: Left Drawer: Cooling Belt
163: Left Drawer: Detection Unit CIS Sensing
Surface
164: Left Drawer: Paper Path 2
167: Booklet Staple Unit: Cartridge (Front)
168: Booklet Staple Unit: Cartridge (Back)
169: Booklet Staple Unit
170: Corner Staple Unit: Cartridge
171: Corner Staple Unit
172: Punch Unit: Perforator
Press [Execute] to execute the function.
173: Finisher: Shift Tray Paper Path 1
174: Finisher: Shift Tray Paper Path 2
175: Finisher: Staple Paper Path 1
176: Finisher: Staple Paper Path 2
177: Finisher: Signature Paper Path 1
178: Finisher: Signature Paper Path 2
179: Finisher: Punch Unit
180: Finisher: Jogger Fence
181: Finisher: Shift Tray 1: Worm Gear
182: Finisher: Shift Tray 2: Worm Gear
Press [Execute] to execute the function.
228: Bypass Tray
229: Bypass Tray: Pickup Roller
230: Bypass Tray: Feed Roller
231: Bypass Tray: Separate Roller
232: 2-Tray LCT: Tray 3: Feed Belt
233: 2-Tray LCT: Tray 4: Feed Belt
234: 2-Tray LCT: Tray 5: Feed Belt
235: 2-Tray LCT: Tray 6: Feed Belt
236: 2-Tray LCT: Tray 7: Feed Belt
237: 2-Tray LCT: Tray 8: Feed Belt
Press [Execute] to execute the function.
5. Adjustment Settings for Operators
218
To Next Page
Loading...
