Technical Bulletin PAGE: 7/10
Reissued:18-Apr-14
Procedure
1. To identify the color causing the lines, print 3 sheets of the halftone pattern (SP2-106-
002-16) in each color.
2. Check if the edge of the mylar attached to M0773457 is torn or not. If torn,
replace M0773457 and print a halftone pattern in the color causing the line.
Confirm the line has disappeared to complete the procedure.
If the mylar is not torn, do the next step.
Figure 1 (Index #5: p/n M0773457 Cover:Upper:Development Unit:Ass'y)
M0773457 Cover:Upper:Development Unit:Ass'y
To Next Page
Loading...
