Technical Bulletin PAGE: 10/10
Reissued:18-Apr-14
Notes 1: To prevent recurrence of White Lines originating in the color development units,
Cyan, Magenta and Yellow, modify the value set in SP 2-907-001 (ACS Switch
Set) to 10. Higher toner consumption will prevent degradation of toner and
developer and maintain better flow of the mixture in the unit. See RTB RM077095
for details.
Note 2: Rotating the development roller in the opposite direction may wear the
mylar and entrance seal of the development unit and cause adverse effects.
Rotate the development roller only in the direction indicated with the seal.
See RTB RM077054 for more detail.
Note 3: If the machine continues to run with a torn Mylar, toner will adhere to the
development roller. In such case, do the procedure on pages 11 ~ 13 of RTB
RG178128d.
To Next Page
Loading...
