Technical Bulletin PAGE: 6/6
Model: Aries-P1.5 (M077) Date: 25-Nov-11 No.: RM077052
Step 5. Mainframe height adjustment
5.1. Adjust the height of the mainframe so that the top edge of the mainframe bracket [A]
aligns with the top edge of the GBC StreamPunch bracket [B].
5.2. Adjust the height of the mainframe on the rear side as necessary.
Note: Make sure the top surface of the copier/printer is level after adjusting the height.
Confirming the height and space after installing the GBC StreamPunch
G178 copier/printer + the GBC StreamPunch + B830 finisher
6 mm
approx0.2 inches
11 mm
approx 0.4 inches
[B]
[A]
To Next Page
Loading...
