Technical Bulletin PAGE: 6/8
Reissued:07-Aug-12
Model: Aries-P1.5/C1.5 Date: 21-Mar-12 No.: RM077067a
7. Remove the COVER:BIAS:DEVELOPMENT ROLLER. (screw x1, snap-fit x1)
* Keep the screw and the snap-fit. They will be used when reassembling the unit.
8. Remove the HOLDER:DEVELOPMENT VIAS:ASS'Y. (screw x3)
9. Remove the HOLDER:DEVELOPMENT BIAS:ASS'Y by slightly pulling it towards the
direction indicated by A, and then, rotate it counterclockwise as indicated by B in the
photo below.
Snap fit at side
COVER:BIAS:DEVELOPMENT
Screw:M4:
Exterior
HOLDER:DEVELOPMENT
BIAS:ASS'Y
B
To Next Page
Loading...
