Technical Bulletin PAGE: 7/8
Reissued:07-Aug-12
Model: Aries-P1.5/C1.5 Date: 21-Mar-12 No.: RM077067a
10. Remove the gear box. (screw x4)
11. Pull out the gear box and the GEAR:DEVELOPMENT ROLLER:Z29 together.
* To prevent the gears inside the gear box from falling out, hold the gear box so that it
faces up. (These gears do not need to be replaced.)
The INSULATOR:REAR:BEARING, circled in red in the photo above, may be detached
from the gear box together with the GEAR: DEVELOPMENT ROLLER: Z29. In that case,
attach it back to the gear box.
Gear box
To Next Page
Loading...
