T
echnical
B
ulletin PAGE: 1/3
Model:
Aries-P1.5
Date:
04-Apr-13
No.:
RM077089
Subject:
New service part: STRIPPER PLATE:PEK:ASS'Y
Prepared by:
T. Miyamoto
From:
1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
Change: A new fusing unit stripper plate was added as an individual service part.
Reason: Higher durability; to prevent breakage of the stripper plate caused by paper jams.
P/N Description Q’ty Int Page Index Note
M0774445 STRIPPER PLATE:PEK:ASS'Y 1 - 137 1 Add
NOTE: This new stripper plate DOES NOT have to be procured for all MIF. Only replace
as necessary in accordance with your customer’s machine usage conditions.
IMPORTANT: The new stripper plate has the following side effect. Chances of generating
glossy lines/streaks are higher compared with the original stripper plate
(p/n: M0774491). If this side effect is confirmed with the new stripper plate,
change the machine settings as described in the following pages.
p/n: M0774445
STRIPPER PLATE:PEK:ASS'Y
To Next Page
Loading...
