Removing Jammed Staples
This section describes how to remove jammed staples.
• Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or
pushing in the finisher's staple unit. You can trap and injure your fingers if you do not.
• Curled paper may cause staples to jam. To avoid this, turn paper over in the tray.
• After jammed staples are removed, the stapler will automatically staple up to 10 times without stapling
paper. If a staple jam occurs on the saddle stitch, the stapler will not staple after the jammed staples
are removed.
• Remove the jammed staples according to the finisher type. Check the type if you are unsure. For details
about the type of finisher, see "Appendix", About This Machine.
Finisher SR5000
This section describes how to remove jammed staples from Finisher SR5000.
3. Clearing Misfeeds
112
To Next Page
Loading...
