Ricoh pro c901 - Booklet Finisher SR5020

CAL003
Return the staple
unit to its original
position, and then
close the finisher
front cover.
Pull out the staple
unit.
Turn knob R10
counterclockwise to
rotate the staple unit.
Hold the lever, and
then push in the
cartridge.
Open the finisher
front cover.
Pull out the cartridge
lever.
Pull out the cartridge
gently.
Remove the empty
refill in the direction
of the arrow.
Push the new refill
into the cartridge
until it clicks.
Push in the cartridge
until it clicks.
Booklet Finisher SR5020
This section describes how to add staples to Booklet Finisher SR5020.
Adding Staples
75
2