CAL005
Close the finisher front cover.
Open the finisher front cover.
Pull out the staple unit.
Raise the levers. Pull out the cartridges gently.
Hold both sides of the cartridge,
and then raise the upper unit.
Remove the empty refill in
the direction of the arrow.
Push in the new staples
until the arrows are aligned.
Push down the upper unit
into the cartridge gently.
Hold the levers, and then push
in the cartridges.
Return the staple unit to its
original position.
Push in the cartridges until they
click, and then lower the levers.
To Next Page
Loading...
