• For details about paper sizes, weights, and the number of sheets that can be bound or punched, and
the volume that can be output to the ring binder tray, see “Specifications for Ring Binder”, About This
Machine.
Binding copies by ring comb
Copies are punched, and then bound by ring comb.
Original orientation and binding position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing
the original on the exposure glass, keep the same orientation, but set the original facing downwards.
The relationship between the orientation in which you place the original and the binding positions is
as follows:
ADF
Original location
Binding
position
*1
BZH092
Right Top Left
Exposure
glass
*1
The above table shows binding positioning. The orientation of the paper does not indicate direction of
delivery.
1. Place the originals.
2. Basic Copying
104
To Next Page
Loading...
