The printing condition screen will appear. The user name, file name, and printing order of the document
will be displayed.
4. Enter the number of print copies with the number keys.
The maximum quantity that can be set is 9999.
5. Press the [Start] key.
Printing will be started.
• You can search the target document using [User Name] or [File Name] situated in the left side of the
screen.
• You can sort the documents by user name, file name, or creation date. Press the item to be used for
the sorting on the top of the list.
• Some of the selected documents may not be printed due to the difference in the size or resolution.
• When changing the printing order, cancel the highlight and then specify the order correctly.
• Pressing the [Clear Modes] key cancels every selection.
• Pressing [Order] displays the selected documents in the printing order.
• The copy and printer features hold the specified printing conditions after the operation is over and
apply them at the next printing.
• When two or more documents are specified, the printing conditions are stored on the first document
but not on the succeeding documents.
• Following settings are available for the printing conditions. For respective printing results, see “Basic
Copying” and “Advanced Copying”.
• Paper tray
• The number of prints
• 2 Sided / Book
• Edit
• Cover/ Slip Sheet
• Sort / Stack, Staple, Punch, Z-fold, Ring Binding, Perfect Binding
• Output/ Finisher
• Stamp
• When printing two or more copies while selecting the sort function, you can confirm the finish by
printing only one copy.
• When printing two or more documents at a time, you can print them as a single continuous document
by specifying the order of their printing.
• When printing two or more documents at a time, the printing conditions set for the first document are
applied to all the remaining documents.
5. Document Server
240
To Next Page
Loading...
