Value Content
Communication Start Request
Receiver (In)
The machine received a request to start communication.
Communication Start Request
Sender (Out)
The machine sent a request to start communication.
Communication Start Log ID
Indicates the log ID for the communication start time.
This is a hexadecimal ID that indicates the time at which the communication started.
Communication Start/End
Indicates the times at which the communication started and ended.
Network Attack Status
Indicates the machine's status when network attacks occur.
Value Content
Violation Detected An attack on the network was detected.
Recovered from Violation The network recovered from an attack.
Max. Host Capacity Reached The machine became inoperable due to the volume of
incoming data reaching the maximum host capacity.
Recovered from Max. Host
Capacity
The machine became operable again following reduction of
the volume of incoming data.
Network Attack Type
Identifies network attack types.
Value Content
Password Entry Violation Password cracking
Device Access Violation Denial-of-Service attack (DoS)
Request Falsification Violation Request forgery
Network Attack Type Details
Indicates details of network attack types.
6. Managing the Machine
130
To Next Page
Loading...
